Cetus Pro Brushless Quadcopter

Overview

The Cetus Pro is a brushless quadcopter equipped with a Lite 1-2S Pro brushless Flight Controller and a 12A ESC. With 1102-18000KV brushless motors and 40mm 3-blade props, it is capable of performing diverse freestyle tricks. It is highly beginner-friendly and training-friendly, featuring turtle mode and three power modes to help pilots capture the fun of FPV racing more easily.

Key Features

• Auxiliary Flight Function: Greatly reduces the threshold of operating, making it the lightest key to opening the door to advanced FPV.
• Brushless Power System: Provides more power and maneuverability in flight, allowing pilots to achieve more FPV freestyle actions.
• Self-Protection: Ensures a safer flight with emergency landing when out of control or in low battery.
• Durable Frame: Made of PA12 material, offering excellent impact resistance. The 360° protection of the whoop frame ensures safe flights both indoors and outdoors.
• Turtle Mode and Three Flight Modes: Makes FPV training much more convenient and accessible.

Specifications

• Positioning System: Optical flow, Barometer, Laser
• Height Positioning: Laser, Barometer
• Position Locating: Optical flow (effective height 0.3-3m)
• Accuracy of Auto-Hover: Horizontal ±0.2m, Vertical ±0.3m (under no wind environment)
• Receiver Protocol: Frsky D8
• Flight Controller: Lite 1-2S Pro brushless FC
• VTX: 25mW
• Camera Tilt Degree: 30°
• Camera: C02 FPV Micro Camera
• TX Mode: Mode 1 & Mode 2 optional
• Motor: 1102-18000KV Brushless motor
• Propellers: 40mm 3-blade 1.5mm shaft hole
• Frame: Cetus Pro Brushless Whoop Frame
• Takeoff Weight: 33.19g (without battery)
• Power System: 1S
• Battery: BT2.0 450mAh 1S 75C Battery
• Flight Time: 4-5 minutes
• Flight Distance: 80m (in wide & undisturbed environment)

Note: The battery will be upgraded from BT2.0 450mAh 1S 30C Battery to BT2.0 450mAh 1S 75C Battery from Feb 2024.

Altitude Hold, Easy to Fly

The altitude hold function enables Auto-Hover, allowing the quadcopter to stay at a current height when pilots' hands are off the transmitter. The barometer and laser achieve accurate and stable positioning, making indoor hovering very stable and easy for beginners.

Note: The altitude hold function is only available in N mode.

Self-Protection, No More Dangers

The quadcopter comes with an excellent self-protection function, making an emergency landing whenever it loses control or has a low battery. It will automatically disarm and drop on the ground in case of a strong collision with an object, reducing the risk of loss and crash.

Turtle Mode, No Burden to Fly Away

When the quadcopter falls to the ground and flips upside down, turtle mode can be activated using the LiteRadio2 SE transmitter to flip it over and resume flying. This eliminates the need to walk over and manually correct its position.

Note: Turtle mode may not work effectively if something gets stuck in the motor or prop. In such cases, immediately push down switch SD on the LiteRadio2 SE transmitter to exit turtle mode.

3 Flight Modes, From Zero to Hero

Three flight modes (N/S/M) are available, catering to different needs and flight environments. Whether a seasoned FPV pilot or a complete beginner, the Cetus Pro Brushless Quadcopter helps anyone fly confidently from day one. The modes can be switched using one SB switch on the transmitter, while speed can be adjusted using the SC switch.

Recommended Parts

• Radio Transmitter: LiteRadio2 SE Radio Transmitter
• FPV Goggles: VR02 FPV Goggles
• Battery: BT2.0 550mAh 1S Battery (for more flight time and higher discharge rate)

Note: Remove the battery plate if installing the 550mAh battery on the Cetus Pro.

FAQ

• Binding with Non-LiteRadio2 SE Transmitter: You can bind the Cetus Pro quad with radio transmitters supporting the Frsky D8 protocol. Use AUX 1 to arm/disarm, AUX 2 to switch flight modes, AUX 3 to switch speed, and AUX 4 to switch FPV frequency. Refer to the user manual for the detailed binding process.

Package Contents

• 1 * Cetus Pro Brushless Quadcopter
• 2 * BT2.0 450mAh 1S 75C Battery
• 1 * BT2.0 Battery Charger and Voltage Tester
• 1 * Type-C Adapter
• 1 * Prop Removal Tool
• 4 * 40mm 3-blade Props
• 2 * User Manual
• 1 * Phillips Screwdriver

Note: The propellers in the package have been modified from three holes to one hole.