GEPRC CineLog35 V2 Quadcopter

Overview

The GEPRC CineLog35 V2 is an advanced 3.5-inch HD FPV cinematic drone designed for both indoor and outdoor flying and filming. Available in three versions—HD O3, HD Wasp, and Analog—this quadcopter integrates cinematic, freestyle, leisure, and safety features to meet diverse user requirements. It features an enhanced structural design with 7075 aluminum columns and a battery mounting method using ties and aluminum parts for stability.

Key Features

• New Design: Strengthened carbon plate with hollow design and injection protection frame.
• High-Performance Flight Controller: GEP F722-45A AIO V2.
• O3 Air Unit Integration (HD O3 and HD Wasp): Memory card and USB ports for easy data reading.
• Shock Absorption Gimbal: Independent design to reduce camera IMU resonance.
• Stable Power Output: SPEEDX2 2105.5-2650KV motor with HQ DT90 propeller.
• Convenient Battery Installation: Uses XT60E1-M plug and carbon plate integrated design.
• Lightweight and Flexible: 3.5-inch HD cinematic FPV with smooth flight feel.

Changelog

• May 8, 2023: Motor changed from SPEEDX2 2105.5-2150KV(6S) to SPEEDX2 2105.5-2650KV(6S).
• September 4, 2023: GPS changed from GEP-M8U to GEP-M10.

Specifications

Common Specifications

• Model: CineLog35 V2
• Frame: GEP-CL35 V2
• Wheelbase: 142mm
• Gimbal Plate: 2.0mm
• Top Plate: 3.5mm
• Bottom Plate: 1.5mm
• FC System: GEP-F722-45A AIO V2
• MCU: STM32F722RET6
• Gyro: ICM 42688-P
• OSD: Betaflight OSD w/AT7456E chip
• ESC: 8Bit 45A
• Motor: SPEEDX2 2105.5-2650KV (6S)
• Propeller: HQProp D-T90MM
• GPS: GEP-M10
• Receiver Options: PNP, GEPRC ELRS 2.4G, TBS Nano RX
• Recommended Battery: LiPo 1050mAh-1300mAh
• Flight Time: 5′00″ - 8′ 30″

Version-Specific Specifications

• HD O3

  • VTX: O3 Air Unit
  • Camera: O3
  • Antenna: 5.8G & 2.4G
  • Weight: 285.8g (TBS Nano RX version)

• HD Wasp

  • VTX: Link
  • Camera: Runcam Wasp
  • Antenna: GEPRC Peano 5.8G LHCP UFL
  • Weight: 277.2g (TBS Nano RX version)

• Analog

  • VTX: GEPRC RAD 1W(UFL)
  • Camera: Caddx Ratel2
  • Antenna: GEPRC Peano 5.8 RHCP UFL
  • Weight: 263.8g (TBS Nano RX version)

Includes

• 1 x CineLog35 V2 (version specific)
• 2 x HQProp D-T90MM (2 pairs)
• 2 x M20*250mm Battery Strap
• 2 x Battery Silicone Pads
• 1 x Set of Screws
• 1 x L-shaped Screwdriver (1.5mm)
• 1 x L-shaped Screwdriver (2mm)
• 1 x L-shaped Screwdriver (3mm)
• 1 x M5 Wrench
• 1 x Plastic Tweezers
• 1 x Antenna Fixed Tube (pair)
• 1 x Keychain
• 1 x GP Camera Mounting Base
• 1 x Naked GP Camera Mounting Base
• 1 x Antenna Mounting Base

Screw Package Includes

• 2 x Cup Head Screws M2*18
• 2 x Round Head Screws with Pad M2*5.5
• 1 x Round Head Screw M2*12
• 2 x Rivet Nut M2
• 4 x Round Head Screws M2*8
• 4 x Round Head Screws M2*7
• 4 x Round Head Screws M2*6
• 2 x Round Head Screws M2.5*6
• 2 x Hexagonal Screw M1.6*8
• 1 x Flange Nut M5
• 2 x Press Rivet Nuts (Brass color) M2*1.9-OD4.9
• 2 x Iron Nut M2
• 2 x Camera Gimbal Shock Absorbing Rubber