DarwinFPV Johnny 5

DarwinFPV- Johnny 5 is a high-performance FPV drone designed for enthusiasts and advanced users. This drone kit comes without a battery, charger, receiver, or remote control, allowing for customization to suit individual needs.

Specifications

Frame

• Wheel Base: 240mm
• Frame Arm Thickness: 5.5mm
• Frame Kit Material: 3K Carbon Fiber

Motors

• Model: DarwinFPV 2207-2400KV Brushless Motor
• Motor KV: 2400KV
• Idle Current (Io/10V): 0.81A
• Lipo Cell: 3-4S
• Weight: 36.4g
• Max Continuous Current: 32A
• Max Continuous Power: 765W
• Configuration: 12N/14P
• Prop Adapter Shaft: M5
• Bolt Holes Spacing: 16mm
• Bolt Thread: M3

ESC (Electronic Speed Controller)

• Model: 4 IN 1 50A BLHeli_S ESC
• Continuous Current: 50A
• Peak Current: 60A (10S)
• Lithium Battery Section Number: 2-6S
• BEC: 5V 2A
• ESC Weight: 10.8g
• Firmware: BL_S
• Maximum Support Throttle Signal: DSHOT600
• Mounting Hole: M3 30.5 * 30.5mm

Flight Controller

• Model: F4 Flight Controller
• Lithium Battery Section Number: 3-6S
• BEC: 10V 1A, 4.5V, 3.3V
• MCU: STM32F405
• Gyro: MPU6000
• OSD: AT7456E
• Firmware: MATEKF405STD
• Weight: 7.2g
• Mounting Hole: M3 30.5 * 30.5mm
• Bluetooth: Yes

VTX (Video Transmitter)

• Model: 5.8G 40CH 800mw VTX TX805P
• Frequency: 5.8G
• Channels: 40CH
• Input Voltage: 7V~24V
• 5V Camera Supply:
  • 120mA (MAX) ---- 25mW @ 12V
  • 200mA (MAX) ---- 200mW @ 12V
  • 300mA (MAX) ---- 600mW @ 12V
  • 350mA (MAX) ---- 800mW @ 12V
• Power Supply: 5V Output for Camera
• Output Power: 25mW/200mW/600mW/800mW switchable
• Antenna Connector: MMCX
• Cable Connector: Solder Pads
• Weight: 8g (excluding antenna)