Cinebot25

Cinebot25 Quadcopter Overview Summary Cinebot25 is a state-of-the-art quadcopter model known for its exceptional controllability and stable aerial footage capabilities. It features a groundbreaking external design and remarkable performance. The Cinebot25 is available in two power versions: the regular version with the SPEEDX2 1404 motor and the sport version with the SPEEDX2 1505 motor.

Features Integrated External Design: Reinforced carbon plate and modified materials used for one-piece injection molding at the bottom. Shock-Absorbing Camera Protection: Ensures better stability for footage shooting. Two Power Versions: Regular version with SPEEDX2 1404 motor and superior version with SPEEDX2 1505 motor. Convenient Parameter Adjustment: TYPE-C and BOOT button on the rear. Optimized Antenna Fixing Component: Silicone T-shaped design. Lightweight Battery: LiHV 4S 720mAh battery, total weight under 250g. Advanced Flight Controller: TAKER G4 45A AIO, providing stable flight computing capability. High Compatibility: Works with O3 VTX and Cabinet, making installation of memory cards and footage loading easier. Customized Receiver Stand: Simplifies internal space. Versatile Battery Fixing: Aluminum components and straps for diverse battery options. Specifications Cinebot25 O3 Quadcopter Frame: GEP-CT25 Grey Wheelbase: 115mm FC: TAKER G4 45A AIO MCU: STM32G473CEU6 Gyro: ICM 42688-P FC Firmware: TAKERG4AIO ESC: BLHeli 32Bit 45A Motor: SPEEDX2 1404 4600KV Propellers: HQprop DT63mm x4 Connector: XT30 VTX: O3 AIR Unit Camera: O3 camera Antenna: O3 original antenna Receiver: PNP (internal VTX receiver) / ELRS2.4G / TBS NanoRX Weight: 182g ±1g (PNP version) Recommended Battery: LiHV 4S 660mAh-720mAh Flight Time: 5-8 minutes (depending on flying methods) Includes 1 x Cinebot25 quadcopter 1 x HQprop DT63mmx4 propeller pack 2 x Battery anti-slip pads 1 x 15150mm battery strap 1 x 15*180mm battery strap 1 x Naked GoPro base 1 x O3 heat sink 1 x Reserved screw pack 1 x L-shaped screwdriver 1.5mm 1 x Frequency pairing pointer 1 x Damping ball puncher Reserved Screw Pack 2 x Camera damping balls 4 x M2 nuts 6 x M2*6 button head screws 4 x M2*18 button head screws 4 x M1.6*8 round head screws with collar 4 x M2*5 button head screws 4 x M1.6*10 allen screws 2 x M2*12 button head screws 2 x M2 self-clinching nuts 2 x T-shaped antenna fixing silicones Cinebot25 Analog Quadcopter Frame: GEP-CT25 Grey Wheelbase: 115mm FC: TAKER G4 45A AIO MCU: STM32G473CEU6 Gyro: ICM 42688-P FC Firmware: TAKERG4AIO ESC: BLHeli 32Bit 45A Motor: SPEEDX2 1404 4600KV Propellers: HQprop DT63mm x4 Connector: XT30 VTX: RAD mini 5.8G 1W Camera: CADDX Ratel 2 Antenna: Peano 5.8G RHCP UFL Receiver: PNP / ELRS2.4G / TBS NanoRX Weight: 160g ±1g (PNP version) Recommended Battery: LiHV 4S 660mAh-720mAh Flight Time: 5-8 minutes (depending on flying methods) Includes 1 x Cinebot25 quadcopter 1 x HQprop DT63mmx4 propeller pack 2 x Battery anti-slip pads 1 x 15150mm battery strap 1 x 15*180mm battery strap 1 x Naked GoPro base 1 x Reserved screw pack 1 x L-shaped screwdriver 1.5mm 1 x Frequency pairing pointer 1 x Damping ball puncher Reserved Screw Pack 2 x Camera damping balls 4 x M2 nuts 6 x M2*6 button head screws 4 x M2*18 button head screws 4 x M1.6*8 round head screws with collar 4 x M2*5 button head screws 4 x M1.6*10 allen screws 2 x M2*12 button head screws 2 x M2 self-clinching nuts 2 x T-shaped antenna fixing silicones